A new assistance-system warning after glass replacement should be reported to the repairer with the exact message and vehicle details. Preserve the pre-repair and post-repair scan results if available. The timing is important context, not proof that the camera itself has failed.
Ask what completion checks were required
The vehicle’s repair information determines the relevant installation and calibration steps. Bosch’s glass-fitter calibration material describes diagnosis and calibration within the windscreen repair process. It does not establish one procedure for all vehicles.
Preserve the actual result
Ask for the calibration report, including whether it completed or failed and the stated reason. A diagnostic code clear is not the same operation. Do not reposition a camera or alter its bracket using a generic online guide.
Contact AXION if electronic diagnosis is needed, confirming the supported scope first. Calibration may require a suitably equipped provider. Until resolved, follow the handbook’s warnings and do not rely on an unavailable assistance feature. Provide glass and camera repair details so the next assessment starts from the completed work rather than repeating assumptions.
Related help
- Parking Sensors Sound Continuously with No Obstacle
- Rear Camera Picture Is Black but Parking Graphics Still Appear
Browse all fault guides or use the vehicle module finder to prepare an enquiry. For help with this fault, contact AXION before booking or sending a module.
