Mechatronic bench results need a clear statement of what was tested
A mechatronic assembly combines functions that may require different test methods.
Mechatronic bench results need a clear statement of what was tested Read More »
Evidence-led diagnosis of intermittent faults, communication failures and problems affecting multiple vehicle electronics systems.
A mechatronic assembly combines functions that may require different test methods.
Mechatronic bench results need a clear statement of what was tested Read More »
FlexRay start-up depends on the network’s configured participants and timing.
FlexRay start-up faults on an incomplete bench setup Read More »
Descriptions such as solenoid A or pressure valve can vary with the transmission and diagnostic system.
A TCU output assessment should identify the exact controlled valve Read More »
Repeated link changes describe instability in the connection.
An Ethernet link that repeatedly connects and drops Read More »
A pressure reading is meaningful only when its location and operating condition are known.
Transmission pressure measurements need the correct test point and condition Read More »
Time-domain reflectometry can estimate where a cable discontinuity lies.
Ethernet cable-distance estimates from a diagnostic test Read More »
Current through a transmission valve is evidence about its electrical operation.
A solenoid’s electrical response does not measure hydraulic pressure directly Read More »
Some single-pair Ethernet links require complementary roles at their two ends.
Automotive Ethernet master and slave configuration after module work Read More »
A current measurement system has its own response limits.
Current-sense bandwidth can affect a solenoid test result Read More »
A PHY can report signal quality in addition to whether the link is up.
Automotive Ethernet signal-quality readings during intermittent faults Read More »